Kuryakyn 7865 BLACK NECK COVERS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Kuryakyn 7865 BLACK NECK COVERS. Kuryakyn 7865 BLACK NECK COVERS User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
PARTS INCLUDED
1 Right Hand Neck Cover Assembly—Black
1 Left Hand Neck Cover Assembly—Black
2 Down Tube Cover Clamps—Black
1 Hardware Kit Including:
4 3/8" x 1-1/2" Adhesive Foam Pads
4 3/4” x 1-1/2” Adhesive Foam PadsNOT USED
2 5/16” Flat Washers
4 #8-32 x 1/2” Socket Head Cap Screws
2 5/16”-18 x 1-1/4” Button Head Cap Screws
1 #10-24 x 2-1/2” Socket Head Cap Screw
1 8" Black Cable Tie
2 Alcohol Pads
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND NOTICES REGARDING THE USE
AND CARE OF THIS PRODUCT.
TOOLS SUGGESTED
Set of Hex Wrenches, Combination Wrenches, Socket Set and Ratchet
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1 Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition. Let cool.
YOU WILL BE WORKING AROUND THE ENGINE AND
EXHAUST SYSTEM DURING INSTALLATION. ENSURE THAT
THE ENGINE AND EXHAUST SYSTEM HAVE FULLY COOLED
TO PREVENT INJURY.
Avoid damage to the motorcycle. Protect painted surfaces with a
soft cloth or blanket.
NOTE: Due to variations from motorcycle to motorcycle, some motorcycles
may require a little extra pressure to engage the fork lock after
installation of the neck covers.
INSTALLATION
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
The product must be properly installed,
maintained and operated under
normal conditions.
Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
BLACK NECK COVERS 7865
7865-22HD-0213
-cont.-
THIS INDICATION ALERTS YOU TO THE FACT THAT
IGNORING THE CONTENTS DESCRIBED HEREIN CAN
RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality.
IF INSTALLING THIS PRODUCT FOR ANOTHER PARTY,
PLEASE MAKE SURE THEY RECEIVE THIS COPY OF THE
INSTALLATION INSTRUCTIONS SO THEY ARE AWARE OF
THE IMPORTANT INFORMATION CONTAINED IN THEM.
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - INSTALLATION

PARTS INCLUDED 1 Right Hand Neck Cover Assembly—Black 1 Left Hand Neck Cover Assembly—Black 2 Down Tube Cover Clamps—Black 1 Hardware K

Page 2

PAGE 2 NOTE: Pictures shown of Chrome parts. Installation of Black parts will be the same. STEP 2 Cut the cable ties that secure the clutch c

Page 3 - Ride On!

PAGE 3 When installing the neck covers, you will need to slightly push down while tightening the top fastener. This will allow adequate clearance be

Commentaires sur ces manuels

Pas de commentaire